Western Systems ›› Products ›› Traffic Management Systems ›› Siemens ACS Lite Adaptive Traffic Management
Siemens

ACS Lite Adaptive Traffic Management

Adaptive Closed - Loop Traffic Control System by Siemens Traffic Solutions.

Description

ACS Lite is an adaptive control software application that has been developed as a closed-loop system by Siemens under contract to the FHWA Research, Development and Technology Traffic Operations Program. It may be deployed as an on-street field master or on a central server.

The ACS Lite software is designed to adapt the splits and offsets of signal control patterns/plans in a “closed-loop” system. Changes to cycle time are handled on a time-of-day schedule like traditional traffic control systems. At each optimization step, which occurs about every 10 minutes, the system changes the splits and offsets a small amount (e.g. 2-5 seconds) to accommodate changes in traffic flows.

Detail

ACS Lite is easy to configure through an HTML browser-based user interface. 75% of the configuration data is uploaded directly from the loacl controllers with no additional user data entry. After uploading configuration data the user configures links, detector locations, and adaptive configuration options through the browser and the system is ready to use for adaptive control.

Viewing and Archiving

As the system is running, web pages are updated each cycle to provide status of each intersection performance and track the changes made to the splits and offsets. In addition, the software archives its performance measures and decisions to a data store for future analysis and retrieval.

Remote Internet Access

Browser-based access to operations is available not only locally, but also via the Internet if the master is equipped for remote IP access (e.g., a cellular modem).

Technical Requirements

  • Replacement of the master controller with an ACS Lite field processor.
  • 9600bps (or faster) serial modems or IP communications at each local intersection.
  • Replacement of existing controllers M50 series or 2070 hardware, and/or upgrade of firmware to SEPAC NTCIP 4.01e (or later).
  • Conversion of signal control plans from ECOM format to NTCIP format.
  • At least one detector for each phase at the stop bar (most detector sizes and technologies are supported) for each intersection needing tuned splits.
  • At least one advanced detector on each coordinated phase (any detection technology including loops, video, and radar at typical standard placements 150 Ft + from stop bar) for each intersection needing tuned offsets.

Benefits

Initial field testing of ACS Lite with Siemens control equipment in Houston, TX has shown 5-25% improvement in arterial travel times, significant reduction in stops, and 5%-50% improvements in delays at side streets and left turns. The ACS Lite approach to adaptive control has been designed to provide a significant amount of benefit for a minimum amount of agency investment in additional infrastructure, training, and maintenance by using stop bar detection and advanced loops commonly used for intersection control.

Downloads

For all communications, networking and intelligent traffic systems (ITS) products in Virginia contact Washington by email at Zach L. Hoiting,ZHoiting@WesternSystems-Inc.com or by calling 425-438-1133.

Search For…

What’s New

Controller Cabinet Test Equipment

Athens Technical Specialists Inc

Athens Technical Specialists IncATSI is the industry leader in conflict monitor testers, BIU testers, loop and detector testers, surge suppressor testers, load switch/flasher/transfer relay testers, and counter/classifier testers.

News & Announcements

Sorry, there are no recent news items or announcements at this time. Please check back again soon.

Western Systems - Innovative Transportation Solutions for Virginia
  • 1122 Industry Street, Bldg. B
    Everett, WA 98203
  • P: 425.438.1133
    F: 425.438.1585
    E: info@WesternSystems-Inc.com
  • Monday through Friday 7:30am to 5pm Pacific Time